DWARF 3 Unboxing and Quick Setup
2025-12-17
9656 words
9 minutes
Master the basics of your DWARF 3 telescope, including setup, accessory installation, and charging.
Note:
- Ensure your phone/tablet supports Bluetooth 4.0 and WiFi 5GHz, and turn off VPN.
- First-time activation and firmware updates require an internet connection. Using your phone is recommended.
1. Unboxing & Quick View
Unbox your DWARF 3 telescope and familiarize yourself with its components.

What’s included:
- DWARF 3 Smart Telescope x1
- Carrying Bag x 1
- Magnetic Solar Filters x 1
- Pouch for Solar Filters x 1
- USB-C Cable x 1
- Wipe Cloth x 1
- Built-in eMMC Storage: 128 GB (Embedded MultiMediaCard)
- Built-in Battery: 10,000 mAh (with external USB Charging Support)
Three Built-in Filters:
- VIS Filter
- Spectral Range: 430–650 nm
- Suitable for everyday photography.
- Astro Filter
- Spectral Range: 430–690 nm
- Ideal for astrophotography and low-light imaging.
Duo-band Filter
Specifically designed to pass two specific wavelengths:
- Hα (656.3 nm)
- OIII (500.7 nm)
Reduces moonlight and urban light pollution, making it perfect for capturing emission nebulae.Bandwidth (FWHM)
- OIII: ~30±3 nm
- Hα: ~15±3 nm
Other Technical Specifications:
- Aperture Diameter: 35 mm (Tele) / 3.4 mm (Wide)
- Focal Length: 150 mm (Tele) / 6.7 mm (Wide) *Wide is a fixed lens, no focus function
- Equivalent Focal Length: 737 (Tele) / 45 mm (Wide)
- Sensor: SONY IMX678 - STARVIS 2
- Neural Processing Unit (NPU): 5
- Telephoto Video: 4K @ 30fps / 1080p @ 60fps
- Telephoto Picture: 3840 x 2160
- Wide-Angle Video: 1080p @ 30fps
- Wide-Angle Photo: 1920 x 1080
- Max Exposure Time: *currently 60 seconds in EQ Mode
Note: Future updates will add additional options for exposure times.
2. Power On/Off
Power On: Short press the power button. You may need to plug in and charge up device.

Download and Install the DWARFLAB App
Before opening & use your App, ensure you have turned off any VPN connections, and verify your Bluetooth/GPS is turned on.

- It is preferred you use a phone with mobile data on to complete the “Activation” process.

Notes:
- If you are on a tablet with no mobile data but only wifi internet, there will be an extra step to connect: Go to Settings- Connection Settings-Enable STA Mode. Then connect to your DWARF, then tap the activate button to proceed with activation as mentioned above.
- If you encounter activation failure, refer to Trouble Shooting Guide For DWARF 3 Users (2. Activation Failure)
Power Off: Long press the power button.

3. Lens Movement
Note: If the lens is flipped to face the backside of the device, the captured image may appear upside down.
Move the lens manually or control it via the DWARFLAB App.


4. Solar Filter Installation
Always use solar filters when imaging the sun.

5. Tripod Installation
DWARF 3 is compatible with any tripod that has a standard 1/4"-20UNC thread, which is common for most camera tripods.

6. Battery and Charging
6.1 Charging Equipment & Interface
- Use a USB-C to USB-C charger supporting PD2.0/PD3.0 fast charging (12V/1.5A, 18W).
6.2 Charging Power
- Fast Charging: USB-C to USB-C cable (9V/12V).
- Battery indicator flashes quickly, and a fast charge symbol appears in the app.
- Slow Charging: USB-A to USB-C cable (5V).
- Battery indicator flashes slowly, and a slow charge symbol appears in the app.
6.3 Operating Environment
- Charge in temperatures between 0°C and 45°C (recommended operating range).
6.4 Charging & Usage Time
- Standby Mode: 15h 50min.
- Connected to App (Preview Mode): 6h 42min.
- Time-Lapse Mode (Wide-Angle): 6h 17min.
- Astro Mode (Telephoto Tracking): 5h 38min.
- Tracking Video Mode (4K Recording): 3h 5min.
6.5 Battery Lifespan
- The battery retains 80% capacity after 4 years of regular use (fully charged/discharged twice a week).
- Warranty: 2 years.
6.6 Special Features
- Supports simultaneous use while charging.
- Can be charged with a power bank.
7. Warranty & Support
- Warranty:2 years for non-human-induced quality issues.
- Activate your DWARF 3 on first use to enable warranty services.
Check warranty status via the DWARFLAB app: Settings > My Device > Activation Status.

- For support, contact: support@dwarflab.com.