Image Credit: Matthew Peters

A total lunar eclipse is one of the most breathtaking events in astronomy. With the DWARFLAB Smart Telescope, you can observe and record every stage with ease. This detailed tutorial guides you through preparation, setup, imaging, and tips to get the most out of your DWARF 2/3 experience.

1. Preparation Before the Eclipse

• 🔋Charge your DWARF 2/3/mini and mobile device fully. Consider a power bank for long sessions. With an A/C outlet, a long USB-C cable allows for all night operation
• 📲Update the DWARFLAB App and firmware before the night of the eclipse.
• 📍Choose a site with a clear horizon and minimal light pollution. (Use apps like Stellarium, or check timeanddate.com in advance to note the eclipse's timing and position.)
• 🦾Set up your tripod on stable, level ground. 

  

2. Quick Setup in the DWARFLAB App

• Mount the DWARF 2/3 securely on its tripod.

• Power on the unit and connect via Wi-Fi to the DWARFLAB app.
• Locate the Moon and Focus: Face the lenses approximately towards the moon , then use **dual-lenses locating** or the joystick to roughly center the moon in the tele photo view. 

**Dual Lenses Locating**: Switch to and double-click the wide-angle view moves the green frame indicator (telephoto view). This feature allows you to locate and quickly focus on objects in the wide-angle lens, like birds in the backyard, pedestrians on the street, or celestial bodies in deep space.

• Choose Shooting Mode:  Enter Solar System Mode. Select Moon.  Tap "Track" and the moon will be precisely centered, focused, and tracked.

• Once DWARF is tracking, you can tap the top-right button to switch between shooting methods like Photo, Burst, Video, or Time Lapse.

• Adjust Parameters and Shoot: After tapping “Track“, the camera auto-adjusts the suitable parameters for the moon, if you may know, typically at 1/250s-1/200s exposure, gain at 0, and VIS filter. Do adjust hue and WB as preferred. If you want to manually focus, you can use two fingers to zoom in on the screen, and then manually adjust the number of the focus steps until the image appears sharp to you.

• To adjust settings for a specific shooting method—such as interval and duration for Time Lapse, or the number of shots for Burst—tap here:

• Press 'shoot' to take your first moon photo!

The above is the complete process for taking pictures of the Moon. You can practice it a few times in advance to familiarize yourself with the shooting process.

Here's a summary of shooting steps:

• Power on and connect to your phone
• Select Solar System-Moon mode
• Roughly locate and center the Moon in the tele photo view
• Tap “Track”
• Switch to your preferred shooting method
• Configure settings like shooting duration/shutter/gain etc.
• Click shoot to start imaging

3. What Parameters/Modes Should I Use for Lunar Eclipse

Recommended Parameters

Source: National Geographic/The effect of this image is not ideal; the Moon in the partial phase should actually looks a bit dimmer than in the penumbral phase.During a total lunar eclipse, the Moon gradually darkens and may even appear deep red, so the exposure time needs to be longer than during a full moon.

Recommended Shooting Modes

• Time-Lapse

  • Ideal for capturing the entire eclipse process.
  • Set intervals and duration.

  

  An example calculation: a 5-second interval with a 10-minute shooting duration results in 120 frames (600 seconds / 5 seconds), creating a 4-second video at 30 fps (frames per second). Ignore it if you hate math and follow the table below to apply duration and intervals.

• Burst

  • Use for capturing specific moments like the transition into the red phase (Blood Moon).
  • Configure short intervals (1-5 seconds) for rapid image capture. 

    

The change of interval settings during a shooting session will take effect to make sure you get a better record of a whole imaging process saying totality.

• Video

  • Record dynamic footage of the Moon's movement during the eclipse.
  • Ensure sufficient storage space for extended recording. (64GB is enough for 3-4 hours of 4K full frame footage)

Tips for Capturing Special Phenomena

• Increase exposure and adjust white balance to emphasize the reddish tone.
• Use Time-Lapse mode to catch the transition into and out of the red phase.
• Familiarize yourself with the telescope's features and App interface by practicing on a full Moon or similar celestial objects.

The following table contains parameter and mode recommendations from experienced astrophotographers Matthew Peters.

Phase	Recommended Settings
🌑Penumbral Phase (subtle shading)	Shooting Method: Photo Exposure: Auto (~5–10ms)Gain: Auto Tip: Take reference shots for comparison.
🌘Partial Eclipse (shadow appears)	Shooting Method: Photo/Video/Time-Lapse Exposure: AutoGain: Auto – Adjust as totality nears Tip: Capture photos at different gains to preference
🌕Total Eclipse (Blood Moon)	Shooting Method: Photo Exposure: 1 – 5sGain: 0-60Frames: 20–30White Balance: Around 4900 Tip: Use longer exposure to capture stars near the moon.
🌔Exit Phase (Moon brightens)	Shooting Method: Photo Exposure: Auto (~5–20 ms)Gain: AutoCapture the shadow retreating.

4. Tips For Pro Work

• 🎥Time-Lapse: Use Video → Time-lapse with 30–60s intervals for a complete eclipse sequence.
• 🌓Bracketing: For partial phases, capture multiple exposures to blend later.
• 🔍Refocus: Adjust using MANUAL focus buttons – will be needed frequently.
• 📌Re-center: If drift occurs, end current tracking, gently re-center the luna and tap "Moon Track" again to correct.
• ✨Stacking: Ideal for reducing noise & adding details during totality. Limit to 20-30 frames.

5. After the Eclipse

All images and videos are stored in the DWARF app. You can share directly, export stacked images for advanced editing with software like PixInsight or Lightroom, or keep the built-in time-lapse as a complete record of the event.

⭐Quick Takeaway

• Use Auto for bright stages.

• Switch to photo to stack (1-2s, Gain 0-70) during totality (blood moon phase). Try different levels.

🍉Video Tutorial on Lunar Eclipse